We have added a new Schedule to our Template.

This new Schedule will give a total weight of steelwork as long as you have used the Waterman Families in the model. I'ts also dependant on a material being assigned to the steel ( i.e. not left to be ).
You can also copy and paste this schedule into existing projects from \Masterdocs\CAD\Revit\Waterman Library\Families\Schedules but, again I would point out it will only work correctly if using Waterman Families and Materials are assigned.

Following on from the "Re-Branding" post yesterday.

I received a couple of comments on the way I had done things and after looking into it I've changed the drawing sheets and templates slightly.
So if you re-loaded the drawing sheets yesterday you will have to do so again to be up to date.

Thank you to those that took the time to point out a better way.

We have been re-branded and as a consequence our logo has changed.

I have updated our Revit template, but, any projects that are already up and running will need the new drawing sheet loaded in. Unfortunately in Revit you will have to do this manually.
The new sheets can be found in \masterdocs\CAD\Revit\Waterman Library\Drawing Sheets
If you are using any project specific drawing sheets these will also need updating to show the new logo. If you require any assistance doing this then please contact me.

Having learnt a bit more at the AUGI Design Academy

last week I have managed to rationalise the number of drawing sheets we had. I've done this using a " Visibility " parameter. Never even considered it before.

So when you start a new project using our Template 5 different drawing sheets will be loaded. A0-WGroup, A1-WGroup, A2-Wgroup, A3-WGroup & A4-Wgroup.

To turn on your particular address and Company name. Select the drawing sheet and go to the Element Properties and turn on the relevant bits.